Detector to help you detect hidden tracking devices such as wireless cameras or bedbugs

RF radio bed detector 924-BIK-04E-PROF Moscow, immediate use without adjustment.

Rf detector of signals, electromagnetic fields ( EMF ) and microwave radiation 924-BIK-04E-PROF Moscow is used to detect and identify RF radiation for the assessment of their level and search for RF-VF point sources with relatively low radiation capacity. The product is equipped with built-in ECO LED lamp and economical RF chip for long-term continuous operation. No initial sensitivity adjustment is required for this product. The device will itself compare the surrounding RF radiation and evaluate the RF situation in the surrounding area. 

Detector to help you detect hidden tracking devices such as wireless cameras or bedbugs – illegal eavesdropping devices. The highest quality detector in its price class. The largest working range among commonly available detectors on. An optical signal that signals exactly what he's got. According to the intensity of the RF signal captured, leds are gradually lit up. No false alarms. 

Check your office, your home, or hotel room on a business trip or vacation to see if there is a hidden camera somewhere. They are mounted in picture frames, on the radio or in the corner of the wall of the room. It is therefore justified if you are still carrying this detector. Manufacturer Moscow.

Main competitive advantages :

- Small dimensions and weight ;

- Long-term operation of devices from one battery ;

- Easy to operate ;

- Monitoring of discharge levels . 

Technical parameters :

 Operating frequencies :

Infrared 5 - 20Hz

EMF 50 - 100kHz

UHF 0.3 - 10GHz

Detection threshold :

Infrared ~ 70 dB

EMF ~ 2MT

UHF ~ 250mW/sm ²

Dynamic range of input signals more than 40 dB

Signal indication structure : pulses of 250ms and cycle 0.5 s

Frequency of 4kHz audio signal indication

Number of LED indicators 4

Illuminating power LED lamp 0,2-2,0 cd

Supply voltage 2.5 - 3.3V

Current collection / operating time :

No 40mA/5000h signal

Light indication 500mA/400h

Sound signal720mA/280h

LED lamp 800mA-8mA/250-2h

Dimensions 48 × 32 × 12 mm

 Weight ( with battery ) 16 g

Operation of equipment

Each time you turn on the side power switch, the power state ( CR2032 lithium battery ) displays the status on the indicator but only within 2 seconds, i.e. the corresponding number of levels is displayed.

With a fully charged battery, one green and three yellow LEDs on the indicator glow, and gradually decrease as the LED power drops. Deep discharge is indicated by a red LED i.e. indicates low battery capacity. With a fully charged flashlight, up to 100 hours of operation is possible. To replace the battery, remove the two screws on the bottom of the product. Push the battery on the support clamps and install a new flashlight, but pack the correct polarity (plus up). Turn on the power on and make sure the battery is not discharged as shown in the indicator. Turn off the power supply, put the cover back and tighten both screws. The product is ready for further use.

as shown on the indicator. Turn off the power supply, put the cover back and tighten both screws. The product is ready for further use.

Note : the operating status of the product is confirmed by regular short flashes of the right red LED once every 2.5s. 

The product contains two types of LED indications when detecting RF radiation:

• silent individual pulses from the right red LED corresponding to uhf; individual pulses green

LED matching EMF and double pulses green LED matching infrared sound;

• Sound - another intermitonlysignal with a frequency of 4 kHz . The sound on reception can be temporarily discarded by briefly pressing the button while the RF signal is detected. To switch modes, you must briefly press the button, press and hold the button again. So you switch every 2 seconds modes: silent

( switches between green and red LEDs) and sound ( 4 kHz signal). Release the button to the mode you want, which will be saved in the new installation. 

With the scanner, look for RF - VF radiation sources in your room. Slowly walk around the equipment, furniture and walls. If you find an RF-VF transmitter, this is indicated by the LED lights on the device. The device is also functional for gsm detection of the phone. A beep also detects a strong signal. The stronger the signal, the more it beeps and the indicator will start to shine almost all of them.

Summary:

If there is any hidden camera or RF bedbug, the LED lights will start to light up gradually. This easily finds where the RF - VF bedbug is located. Before you start exercising your focus, you need to adjust the sensitivity of the device from 'LOW' to high sensitivity. Now you can move with the device slowly and verify the walls, plants, windows, electrical outlets, wooden furniture, living rooms, bedroom decorative materials... Some devices may not be bedbugs, but they still emit VF radiation – see, for example, the Your mobile phone if you're on the phone.

Device test:

Try attaching the detector e.g. to your mobile GSM phone and dial some mobile phone number. The device should immediately detect the VF -GSM signal and alert you to it by beeping (weak cracking in the speaker).

And that's how the device is treated if we attach it to the VF bedbugs. It's easy to find or even a modified mobile GSM phone, which is still on and sending your voice messages from the surrounding area without your knowledge. 

Determine the power supply and location of the RF source. When receiving an RF signal, three yellow LED and red LED lights indicate the signal level in decibels relative to THE CE standards (DBS). For example, the level of 40dBs ( indicating all LEDs ) shows a surplus speed of 10000 times in terms of performance.

This product allows you to determine the location of radiation depending on the increasing number of yellow LEDs  

red LED when zooming in.

Using the LED lamp: To activate the flashlight, press and hold the button until the LED at the end of the case turns on. Pressing the button again leads to a triple increase in brightness to the maximum of 4s. Release the button to the desired brightness. To turn off the flashlight, press the button briefly.