Broadband electromagnetic radiation generator TEMPEST LGS505/451

Noise generator. TEMPEST signals containing confidential information may appear when different devices (such as computers) are in operation. These signals can be intercepted using special equipment (USRP, spectral evaluators).  

Broadband electromagnetic radiation generators are designed for the operation and active protection of information systems (BACS), providing protection against information leakage through TEMPEST channels by stopping the boundary of the broadband electromagnetic noise control area, which can be spurned or secured to the wiretap. It is also advisable to use mains noise generators when suspecting the location of wiretap technology in the 230V grid, through which wiretaps are not only permanently unpluged, but a wiretap is made over the power network, whether digital or analog, i.e. they send information to your attacker without your knowledge. 

Active AC (230V) protection is a method involving the creation of special noise signal generators that are higher than the level of audio signal devices or information signals that send information over the 230V power network from your room.

Noise generator in the frequency range 0.01 to 1000 MHz, protects your computer technology against information data leakage. Confidential, secret, or top secret. Of course, without a permanent Internet connection. That's the only way you can protect your data. 

AC noise generator, a system designed for the active protection of information data equipment from information leakage through the power supply line or grounding point.

The device provides protection for single-phase three-wire power lines of 230 V, 50 Hz ("phase", "zero" and "protective conductor") by generating broadband noise interference, noise masking in all conductors in the frequency range 0,01 to 1000 MHz.

The device is an analog medium generator with an active random noise output structure within the mains power cord.

The device can be controlled by products via wired remote devices. Remote input for connecting the switching contact (lever switch with buttons and other switching device) 

Signal level at power cord plug in the frequency band of 

10 - 150 kHz and receiver bandwidth of f=200 Hz at least 40 dBμV

Signal level at power cord plug in the frequency band of 

0.15 - 30 MHz and receiver bandwidth of f=9 kHz at least 40 dBμV

Signal level at power cord plug in the frequency band of 

30 - 300 MHz and receiver bandwidth of f=120 kHz at least 45 dBμV

Generator output signal level in the frequency band of 

10 - 150 KHz and receiver bandwidth of f=200 kHz at least 50 dBμV

Generator output signal level in the frequency band of 

0,15 - 30 MHz and receiver bandwidth of f=9 kHz at least 50 dBμV

Generator output signal level in the frequency band of 

30 - 1000 MHz and receiver bandwidth of f=120 kHz at least 55 dBμV

Interspectrum correlations factor no more than 2

Power consumption, 230 V / 50 Hz

no more than 55 W

Power voltage ~ 230 V / 50 Hz

Dimensions (no antenna) 188x110x70 mm

Weight,(no antenna) no more than 1 kg

Product from the group "Special Mode"

The product of a group of "special regime"