Universally usable RF bug detector with 306/2016 lens finder

Professional RF Signal Detector/Spy Camera Detector/Cell Phone Detector/Wireless Camera Detector

A unique setting of 2 degrees of sensitivity finds the signal source even in a full noise position.

A high-sensitivity device usually detects a strong signal over a longer distance, but could not zoom in and find the signal source. Or just interfere with the strong noise of the environment and could not be detected.

And most detectors on the market that have low sensitivity can detect only 3G 2100 in less than 0.5 inches or even without response.

It uses unique technology for two-step digital sensitivity settings. In the first phase, it can detect a signal of 3G 2100 or 10 mW of 2.4 G (both signals are weak) to 7 meters.

In the second phase, it can detect and approach an amplifier with a power of 2 W (very strong signal) of only 2 feet.

This device can pick up a weak and strong signal no matter where you are in a quiet or noisy place.

This device is versatile high frequency signal detector that can detect all wireless (high frequency) frequencies in the 50 MHz band ~ 6.0 GHz inclusive

- GSM phone, 3G / 4G smartphone

- recording signal in standby mode,

- WiFi

- wireless error (hidden microphone)

- wireless analog and digital cameras, IP camera

- GPS tracker (2G/3G/4G Multi network modem)

- new error and new remote-controlled spy camera

  mobile phone ... Etc.

Properties:

Unique 2 degree sensitivity setting

the signal source even in a point of full noise.

RELIABLE BENCHMARK

AUTOMATIC STANDALONE TEST

8-LED SIGNAL STRENGTH

SMART DATA ON ALL STATUS

TWO TYPES OF WARNING MODE

STRONG SIGNAL WARNING

AUTOMATIC INDICATION OF SIGNAL TYPE

BATTERY AND CHARGE STATUS

EXPERT DETECTION 3G 2100

SENSITIVITY LEVEL DOWN - MINUS BUTTON

DISCOVER THE GSM CARD / 3G / 4G BUG & SPY

Detection of registration of standby / idle phone

SEMI DIRECTIONAL ANTENNAS

SUPPORT BANK ENERGY FOR LONG-TERM USE

REMOTE CABLE DETECTION

GENERAL AND WIDE FREQUENCY RANGE

This device is a universal RF signal detector, which can detect all wireless (RF Radio Frequency) devices at 50 MHz ~ 6.0 GHz, including GSM phone, 3G / 4G smartphone, standby registered signals, Wi-Fi, wireless bedbugs (hidden microphones), wireless analog and digital cameras, IP cameras, signal breakers and new bedbugs and new spy cameras remotely controlled by the phone.

Specifications:

Specifications * Specifications are vassed without notice.

Detection range 50 MHz ~ 6.0 GHz

Dimension length x width x height : 11.6 x 7 x 3.3 cm (not including antenna)

Weight Around 170 g (not including batteries)

Power 1. 5V DC switching power adapter

2. AAA / UM-4 rechargeable or non-rechargeable battery x 4

Warning mode 1. LED indication 2. Beeps alarm sound

3. Acoustic display 

4. Vibration

5. Silent Detection Headphones

Tuner sensitivity

1. Set the detection distance to find the signal source

2. Remove interference environment

Distance detection Wireless bedbug (2 mW) up to 25 feet (beep-beep)

up to 15 feet (sound-acoustic)

10 mW 2.4 GHz wireless camera up to 15 feet

10 mW 5.8GHz wireless camera up to 4 feet

GSM cell phone up to 50 feet

Smartphone up to 13 feet

3G 2100 mesh cell up to 3 feet

* The detection distance of wireless (RF radio frequency) devices will vary depending on its output signal strength

Properties:

• Can detect all wireless bedbugs at 50 MHz ~ 6.0 GHz. Additional audio receivers covering only 900 MHz.

• Can detect wireless bedbugs, GSM/ 3G bedbugs, wireless analog cameras, wireless digital cameras/ IP cameras, 3G spy cameras, Wi-Fi, 2G/ 3G/ 4G phones, GPS trackers

• Power On Self Test ensures that all functions are in normal condition.

• Clear LED indication of signal type and battery status settings

• 3 warning modes

• Auto indication of the detected signal type

• External battery support for long-term use

• Standby/ Idle detection of 4G smartphones